Pressure Tech

Pressure Tech

The MF-301 is a medium flow piston sensed pressure reducing regulator, which incorporated a balanced main valve to provide stable control under varying inlet pressures. The regulator has a PCTFE seat for excellent shut off and control on gas service, A combination of sensors and spring range provide a range of pressure control options with minimal torque...

Pressure Tech

Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The...

Pressure Tech

The BP-MF690G/H is a back pressure regulator for gas or liquid applications suited for typical low flow applications to 50lpm (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded outlet port.

Pressure Tech

The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to 10lpm (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the outlet port.

Pressure Tech

The BP-301 incorporates a highly sensitive piston to control pressures up to 70bar with the lower Cv value of 0.1, and 35bar with a higher Cv of 0.5. Both designs provide accurate back pressure control on liquid or gas applications. Unlike relief valves, the set load from the spring is not directly applied to the seating area, and the piston sensor...

Pressure Tech

The BP-300 has been designed with a convoluted Inconel X750 diaphragm that lasts 50% longer than alternative stainless steel designs. Its compact simple design makes it ideal for general purpose applications, where accurate control of upstream pressure is required.

Pressure Tech

The LF-301 provides a compact and economical solution for controlling pressure up to 180bar on low flow applications. Ideal for first stage pressure let down where basic pressure control is required. A small piston sensing element allows low toque adjustment with a range of springs with fine pressure adjustment.

Pressure Tech

A compact and economical high pressure regulator with precision machined sensing elements to allow fine pressure control on pressures up to 414bar, which can be supplied as non venting or self venting (non adjustable).

Pressure Tech

The HYD-691 is the compact version of the highly successful LF-690 series regulator, it has been designed as an economical alternative to the LF-690 for hydraulic oil applications, yet still incorporates all the key features of the larger regulator including ceramic seats. The ceramic ball has a ‘glass like’ finish to provide a positive shut-off and is...

Pressure Tech

The MF-414 is a medium flow piston sensed pressure reducing regulator, which incorporates a balanced main valve to provide stable control under varying inlet pressures. The regulator has a PEEK seat for ultimate protection on gas service. A segregated captured vent allows pressure reduction of the outlet pressure through a 1/4 NPT port on the side of the...

Pressure Tech

Specially designed regulator for control of low outlet pressures typically used on logic control systems where control of stepping has to be within +/-1 bar accuracy. Features include balanced main valve, large piston sensed element, and lower entry access to seating cartridge with built in 40 micron filter.

Pressure Tech

The LF-690 uses Ceramic Seating to provide ultimate protection against the harsh service encountered on hydraulic services. The unique seating cartridge provides a dampening action on this critical component to prevent “chattering” or “unstable frequency resonance”. The regulator is self relieving with segregated captured vent to prevent deterioration to...