Categories
Shop by
Pressure Regulators
- 1
- 2
Loading...
High Flow’ Pressure Regulator for liquid or gas applications Diaphragm and Piston Sensed Options
'High Flow' Pressure Regulator for liquid or gas applications Diaphragm and Piston Sensed Options
An economical heated regulator available in ‘side entry’ or ‘in-line’ heat transfer options to maintain sample gases in their vapour state. The ‘in-line’ design maximizes the heat transfer area via a unique spiral machined heater sheath, which mixes the gas and ensures efficient heat transfer. The ‘side entry’ design can be used in applications where heat...
Certified to ATEX directive 94/9/EC, the XHR- 300 helps to maintain saturated gases in their vapourised state due to its unique DUAL heating design. Two 100W heater cartridges, or steam tubes, are inserted in spiral machined sheaths, which agitate the media to help with the heat transfer and analysis process. The propriety PCB is easy to wire and...
The TS-300 provides stable pressure control under decaying cylinder pressure. The first stage of the regulator is set 35bar to allow maximum flow capability through the regulator.
The MINI-300 provides an economical, lightweight, and versatile regulator range, designed for customers who want accurate control from a compact unit. The standard units utilise two piston sensing options to allow pressure control from 5psi to 1000psi (and a modified version up to 3000psi).
The LF-300 has been designed with quality and reliability in mind, with genuinely unique features designed into this single stage regulator. Finite Element Analysis, combined with physical cycle tests, created an Inconel X750 diaphragm that lasts 50% longer than a typical stainless steel designs. The metal diaphragm means that leak integrity is...
Teflon lined diaphragm sensed regulator for sensitive control. Max inlet: 230bar / 3340psi - Max outlet: 10bar / 150psi Flow: Cv 0.06 - Port size: 1/4" NPT - Gas service - non venting
Quality gas cylinder regulators made to last, Pressure Tech have created a flexible approach to individual regulator requirements. ‘Mix and match’ your needs against our ordering system. Please refer to our ACS-300 data sheet for auto-changeover regulators.
The ACU-300 incorporates two diaphragm sensed regulators into a single body to create a compact Auto-Changeover design. The automatic operation allows a continual supply of pressure between two gas bottles, and the second stage regulators ensures consistent pressure control under varying inlet pressure changes. Check Valves are fitted as standard to...
Inlet: 1-1/4"(Dual) Outlet: 2" Vent: 1" Cv = 33 Rated Flow = 300 GPM
Inlet: 1"(Dual) Outlet: 1-1/2" Vent: 1" Cv = 21 Max Flow Rate = 200 GPM