Sold
Variable Displacement Plata LVP Piston Pump
Casappa

Variable Displacement Plata LVP Piston Pump

Plata [LVP]

Features

Variable displacement axial piston pumps swash plate design.

PLATA pumps are ideally suited for medium and high pressure open circuit applications.

Displacements from 1.75 in³/rev (28,7 cm³/rev) to 5.36 in³/rev (87,9 cm³/rev)
Max. peak pressure up to 5075 psi (350 bar)
Max. speed up to 3000 min-1

  • Energy saving
  • Low noise emission
  • Short response time
  • Drive shaft bearing suitable for radial and axial loads
  • Multiple combinations

 

Controls

  • Pressure compensator
  • Flow and pressure compensator (Load Sensing)
  • Torque limiter
  • Electrohydraulics servocontrols

Casappa Product Catalogue

Download (1.26M)

Casappa LVP series

Download (2.35M)

You May Also Like

‹ ›
New
Add to Enquiry
Dynex

DYNEX PF6000 SERIES FIXED DISPLACEMENT CHECKBALL PUMPS 12.2 to 22.4 gpm (46,2 to 84,8 L/min) at 1800 rpm Rated: 4 000 psi (380 bar), Maximum: 6 000 psi (1040 bar)

New
Add to Enquiry
Dynex

Split-Flow Pumps The checkball pump design, with its individual piston check valves, offers a unique advantage among hydraulic pump designs. With our design each pumping chamber can be isolated, and the output from each piston can be used separately! This means ONE Dynex pump can supply multiple functions and synchronized movement without flow dividers....

New
Add to Enquiry
Dynex

DYNEX PV4000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS 12.0 to 22.4 gpm (45,4 to 84,8 L/min) at 1800 rpm Rated: 4 000 psi (280 bar), Maximum: 8 500 psi (590 bar)

New
Add to Enquiry
Dynex

DYNEX PV4000 SERIES VARIABLE DELIVERY CHECKBALL PUMPS 12.2 to 14.0 gpm (45,2 to 53,0 L/min) at 1800 rpm Rated: 4 000 psi (280 bar), Maximum: 6 000 psi (420 bar)

New
Add to Enquiry
Dynex

DYNEX PV6000 SERIES PRESSURE COMPENSATED CHECKBALL PUMPS 31.1 to 61,4 gpm (117,7 to 232,4 L/min) at 1800 rpm Rated: 6 000 psi (420 bar), Maximum: 8 500 psi (590 bar)

New
Add to Enquiry
Dynex

DYNEX PV6000 SERIES VARIABLE DELIVERY CHECKBALL PUMPS 35.4 to 54.0 gpm (134,0 to 204,4 L/min) at 1800 rpm Rated: 5 500 psi (380 bar), Maximum: 6 000 psi (420 bar)

New
Add to Enquiry
Dynex

DYNEX PV2000 SERIES VALVEPLATE PUMPS Pressures to 4000 psi (280 bar), Flows to 24.5 gpm (92,7 L/min) at 1800 rpm.

New
Add to Enquiry
Casappa

Whisper [WS] Features Gear pumps built in three pieces with an extruded body in high resistance aluminium alloy. WHISPER is a new and original technology protected by international patents and applied to a family of external gear pumps and motors that feature low noise emissions. The wide choice of shafts, flanges and ports, in compliance with all...

New
Add to Enquiry
Casappa

Features Gear pumps made of cast iron in two pieces. Ideal for truck application. Displacements from 0.50 in³/rev (8,26 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30, 35 and 40. Max. peak pressure up to 4713 psi (325 bar). Max. speed up to 3000 min-1

New
Add to Enquiry
Casappa

Kappa [K] [KP] [KM] Features Gear pumps and motors made of cast iron in two pieces. A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space. Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 25, 30, 35 and 40. Max. peak pressure up to...

New
Add to Enquiry
Casappa

Magnum [HD] Features Gear pumps and motors made of cast iron in three pieces. An extremely versatile and reliable design, also in the most extreme operating conditions. Displacements from 1.05 in³/rev (17,28 cm³/rev) to 7.66 in³/rev (125,63 cm³/rev) available in groups 30 and 35. Max. peak pressure up to 4640 psi (320 bar). Max. speed up to 3000 min-1 

New
Add to Enquiry
Casappa

Polaris [PH] Features Gear pumps and motors built in three pieces with cast iron body. The new gear pumps and motors "PH" series is an evolution of the "POLARIS" series. "POLARIS PH" has a new body made of cast iron to have higher operating parameters and keep the full POLARIS versatility regarding shafts, flanges, ports and built-in valves. This project...

New
Add to Enquiry
Casappa

Plata [LF] Features Fixed displacement axial piston pumps and motors swash plate design for open circuit applications. The design is extremely compact and it can integrate many functions. An electrically controlled valve can be fitted on the pump and an electronic board controls the flow and the speed of the powered motor. Unidirectional pumps LFP48:...

New
Add to Enquiry
Casappa

Strada [BAP] Features Fixed displacement bent axis piston pumps. STRADA pumps are ideally suited for PTOs applications in vehicles. Displacements from 2.49 in³/rev (40,9 cm³/rev) to 6.71 in³/rev (110 cm³/rev) available in groups 32 and 37. Max. peak pressure up to 5800 psi (400 bar). Max. speed up to 2950 min-1.

New
Add to Enquiry
Casappa

Up Easy [EP] Features Double acting hand pumps providing flow in both directions of lever movement. Displacements from 0.73 in³/cycle (12 cm³/cycle) to 2.75 in³/cycle (45 cm³/cycle).  Max. pressure 4568 psi (315 bar).

New
Add to Enquiry
Casappa

MVP - MVPD Features Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications.  The compact design allows to be mounted directly on engine motors. The new "MVPD" series allow higher flow rates than traditional pumps with the same dimension, higher machine speeds without affecting the...

New
Add to Enquiry
Casappa

Plata [DVP-SVP] Features Variable displacement axial piston pumps swash plate design for open circuit applications. SVP single flow, DVP dual flow on piston pump and an additional piggybacked gear pump. The automatic overall torque limiter allows to optimize the performance of the machine. SVP and DVP pumps has been designed specifically for mini...

New
Add to Enquiry
Casappa

TVP Features Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact design allows to be mounted directly on the PTOs. Displacements from 3.66 in³/rev (60 cm³/rev) to 5.17 in³/rev (84,7 cm³/rev).  Max. peak pressure up to 5800 psi (400 bar).  Max. speed up to 3000 min

New
Add to Enquiry
GPM

Series 215 Series 230 Series 250 Series 265

New
Add to Enquiry
SC

Requires no lubrication High flow, medium pressure Remote control capabilities Oil-free high pressure section Nominal pressures up to 12,500-psi Air operated - does not require electricity The GBT series is able to achieve higher compression ratios by combining the first and second stage with an interconnected hydraulic (gas) piston. Maximum outlet...

New
Add to Enquiry
SC

LOW FLOW, LOW PRESSURE REQUIRES NO LUBRICATION REMOTE CONTROL CAPABILITIES OIL-FREE HIGH PRESSURE SECTION NOMINAL PRESSURES UP TO 7,500-PSI AIR OPERATED � DOES NOT REQUIRE ELECTRICITYThe GB series is the most economical of the SC Hydraulic Gas Boosters and is ideal for applications not requiring much volume such as pressure testing small vessels or...

New
Add to Enquiry
SC

REQUIRES NO LUBRICATION HIGH FLOW, MEDIUM PRESSURE REMOTE CONTROL CAPABILITIES OIL-FREE HIGH PRESSURE SECTION NOMINAL PRESSURES UP TO 12,500-PSI AIR OPERATED � DOES NOT REQUIRE ELECTRICITY This series of boosters doubles the volume of output gas per cycle and is a good choice for moving relatively high volumes at pressures up to 20,000 psig. Supply...

New
Add to Enquiry
SC

REQUIRES NO LUBRICATION LOW FLOW, MEDIUM PRESSURE REMOTE CONTROL CAPABILITIES OIL-FREE HIGH PRESSURE SECTION NOMINAL PRESSURES UP TO 15,000-PSI AIR OPERATED � DOES NOT REQUIRE ELECTRICITY This series has the same characteristics of the standard GB Series however the double head allows half the input pressure to achieve the same outlet pressure.

New
Add to Enquiry
SC

REQUIRES NO LUBRICATION. HIGH FLOW, MEDIUM PRESSURE. REMOTE CONTROL CAPABILITIES. OIL-FREE HIGH PRESSURE SECTION. NOMINAL PRESSURES UP TO 12,500-PSI. AIR OPERATED � DOES NOT REQUIRE ELECTRICITY This series has the same characteristics of the standard GBD however the double head allows half the input pressure to achieve the same outlet pressure.

New
Add to Enquiry
SC

REQUIRES NO LUBRICATION. HIGH FLOW, MEDIUM PRESSURE. REMOTE CONTROL CAPABILITIES. OIL-FREE HIGH PRESSURE SECTION. NOMINAL PRESSURES UP TO 21,250-PSI. AIR OPERATED � DOES NOT REQUIRE ELECTRICITY This series has the same characteristics of the standard GBT however the double head allows half the input pressure to achieve the same outlet pressure.

New
Add to Enquiry
SC

ECONOMICAL REQUIRES NO LUBRICATION COMPACT AND LIGHTWEIGHT SINGLE ACTING, SINGLE STAGE IDEAL FOR OEM APPLICATIONS PRESSURES UP TO 680-PSI (AB-7) AIR OPERATED � DOES NOT REQUIRE ELECTRICITY The AB Series air booster is a compact, single-acting unit available in 1.7:1, 3.7:1 or 7:1 ratios. This booster is an inexpensive alternative for applications...

New
Add to Enquiry
SC

HIGH FLOW CAPACITY REQUIRES NO LUBRICATION DOUBLE ACTING, SINGLE STAGE PRESSURES UP TO 855-PSI (ABD-5) AIR OPERATED � DOES NOT REQUIRE ELECTRICITY The ABD-2, ABD-2S and ABD-5 are double-acting, single stage air boosters in 2:1 and 5:1 ratios. These boosters can supply equipment with added air pressure when plant supplies are depleted due to overuse or...

New
Add to Enquiry
SC

HIGH OUTPUT CAPACITY GUARANTEED PERFORMANCE MULTIPLE OUTPUT CAPACITIES SIMPLE OPERATION PRINCIPLE DESIGNED FOR EASY MAINTENANCE WIDE RANGE OF OPERATING PRESSURES 10-4 Series pumps have a 4" diameter air piston and a 1 �" stroke. Nine models are available with pressures up to 22,000 psig. When operating from 0 to rated hydraulic pressure, air consumption...

New
Add to Enquiry
SC

HIGH OUTPUT CAPACITY GUARANTEED PERFORMANCE MULTIPLE OUTPUT CAPACITIES SIMPLE OPERATION PRINCIPLE DESIGNED FOR EASY MAINTENANCE WIDE RANGE OF OPERATING PRESSURES 10-5 & D5 Series pumps have a 5 �" diameter air piston and a 1 �" stroke. Sixteen models are available with pressures up to 55,000 psig. When operating from 0 to rated hydraulic pressure, air...

New
Add to Enquiry
SC

HIGH OUTPUT CAPACITY GUARANTEED PERFORMANCE MULTIPLE OUTPUT CAPACITIES SIMPLE OPERATION PRINCIPLE DESIGNED FOR EASY MAINTENANCE WIDE RANGE OF OPERATING PRESSURES 10-6 & D6 Series pumps have a 7" diameter air piston and a 2 �" stroke. Thirteen models are available with pressures up to 65,000 psig.When operating from 0 to rated hydraulic pressure, air...