Sold
GBT Series Booster
SC

GBT Series Booster

  • Requires no lubrication
  • High flow, medium pressure
  • Remote control capabilities
  • Oil-free high pressure section
  • Nominal pressures up to 12,500-psi
  • Air operated - does not require electricity

The GBT series is able to achieve higher compression ratios by combining the first and second stage with an interconnected hydraulic (gas) piston. Maximum outlet pressure is the supply pressure plus the drive area ratio times the area ratio of both hydraulic (gas) pistons.

Application

  • Laser cutting
  • Leak detection
  • Pressure testing vessels
  • Low pressure gas recovery
  • Charging of nitrogen bottles
  • Gas assisted injection molding
  • Aircraft slide chute gas storage
  • Charging of nitrogen accumulators
  • Transfer of SF6 for arc suppression
  • Transfer of SF6 for circuit breaker insulation
  • Boosting pressure from nitrogen generators

 

SC Gas Booster Series

Download (799.84k)

SC GBT Series Gas Booster Spec

Download (95.99k)

You May Also Like

‹ ›
New
Add to Enquiry
miniBOOSTER

HC1W versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PRETURN: As low as possible (return pressure to tank) PH: 800 bar maximum (outlet pressure) POUTLET: PH = (PIN – PReturn) x I (intensification) Mounting: Inline tube A model = no dump valve B model = with dump valve G model = direct proportionally controlled

New
Add to Enquiry
miniBOOSTER

HC2 versions: 11 different intensification factors PIN: 20–207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories:  Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

Up to 2.5 times the volume HC2D versions: 13 different intensification factors PIN: 20-207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) x i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B...

New
Add to Enquiry
miniBOOSTER

Up to 2.5 times the volume HC2D-D versions: 13 different intensification factors PIN: 20 – 207 bar (inlet pressure) PRETURN: As low as possible (return pressure to tank) PH: 800 bar maximum (outlet pressure) POUTLET: PH = (PIN – PReturn) X i (intensification) Mounting: Flange, manifold system miniBOOSTER pattern Accessories: Pilot-operated dump valve...

New
Add to Enquiry
miniBOOSTER

HC2P versions: 10 different intensification factors PIN: 0.4 bar vacuum to 2 bar in suction line (inlet pressure) PH: 800 bar maximum (outlet pressure) POUTLET PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Rotation speed: Minimum 1,200 min-1 / maximum 3,000 Min-1 Starting torque: Maximum starting torque 0.14 Nm Power consumption: 87 W...

New
Add to Enquiry
miniBOOSTER

HC2D2 versions: 8 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media 2...

New
Add to Enquiry
miniBOOSTER

HC2D2W versions: 8 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media...

New
Add to Enquiry
miniBOOSTER

C2W versions: 11 different intensification factors PIN: Inlet pressure 20-207 bar PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC2DW versions: 8 different intensification factors PIN: Inlet pressure 20-207 bar PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) I (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC3 versions: 11 different intensification factors PIN: 20–207 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: NG6 (D03) stacking manifold system Accessories: Pilot-operated dump valve available A model = no dump valve B model =...

New
Add to Enquiry
miniBOOSTER

HC3 versions: 11 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: NG6 (D03) stacking manifold system A model = no dump valve G model = direct proportionally controlled

New
Add to Enquiry
miniBOOSTER

HC3 - D versions: 11 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Manifold system miniBOOSTER pattern Accessories: Pilot-operated dump valve available A model = no dump valve B...

New
Add to Enquiry
miniBOOSTER

HC3 - F versions: 11 different intensification factors PIN: 20–207 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Manifold system miniBOOSTER pattern Accessories: Pilot-operated dump valve available A model = no dump valve B model...

New
Add to Enquiry
miniBOOSTER

HC3 - H versions: 11 different intensification factors PIN: 20–207 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: NG6 (D03) stacking manifold system Accessories: Pilot-operated dump valve available A model = no dump valve B model =...

New
Add to Enquiry
miniBOOSTER

HC3 - I versions: 11 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 500 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: NG6 (D03) stacking manifold system Accessories: Pilot-operated dump valve available A model = no dump valve B model...

New
Add to Enquiry
miniBOOSTER

HC4 versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC4H versions: 7 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 3,000 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) x i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve incorporated A model = no dump valve B model = with dump valve G...

New
Add to Enquiry
miniBOOSTER

HC4W versions: 9 different intensification factors PIN: Inlet pressure 20-207 bar PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i ( intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC5 versions: 11 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories: Pilot-operated dumpvalves incorporated High Pressure in two directions

New
Add to Enquiry
miniBOOSTER

HC6 versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model= with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC6D versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model...

New
Add to Enquiry
miniBOOSTER

HC6D-D versions: 9 different intensification factors PIN: 20–207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Flange, Manifold system miniBOOSTER pattern Accessories: Pilot-operated dump valve available A model = no dump valve B...

New
Add to Enquiry
miniBOOSTER

HC6H version: 8 intensification factor PIN: 20 – 207 bar (inlet pressure) PH: 5,000 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) I (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve, up to 3,000 bar

New
Add to Enquiry
miniBOOSTER

HC62 versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube / HP-flange mounting (optional) Accessories: Pilot-operated dump valve available A model = no dump valve B...

New
Add to Enquiry
miniBOOSTER

HC63 versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) Mounting: Inline tube / HP-flange mounting (optional) Accessories: Pilot-operated dump valve available A model = no dump valve B...

New
Add to Enquiry
miniBOOSTER

HC6D2 miniBOOSTER HC6D2 versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at...

New
Add to Enquiry
miniBOOSTER

HC6DW versions: 14 different intensification factors PIN: Inlet pressure 20-207 bar PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) I (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve available A model = no dump valve B model = with dump valve G model =...

New
Add to Enquiry
miniBOOSTER

HC6D2W versions: 9 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 800 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) i (intensification) The intensification ratio is related to the inlet pressure at media 2, the values in the table are measured at 1 bar on media...

New
Add to Enquiry
miniBOOSTER

HC7 versions: 5 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 2000 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) x i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve incorporated A model = no dump valve B model = with dump valve G...

New
Add to Enquiry
miniBOOSTER

HC7-U versions: 6 different intensification factors PIN: 20 – 207 bar (inlet pressure) PH: 2000 bar maximum (outlet pressure) PRETURN: As low as possible (return pressure to tank) POUTLET: PH = (PIN – PReturn) x i (intensification) Mounting: Inline tube Accessories: Pilot-operated dump valve incorporated B model = with dump valve G model = direct...